| Référence | Alimentation | Interface | Dimensions (L x l x H) | Heading précision | Heading résolution | Précision | Tilt résolution | Commentaire | Document PDF |
|---|---|---|---|---|---|---|---|---|---|
| AHRS TRAX 2 | 3.7 - 9V | - RS232 - TTL | 3.5 x 4.3 x 1 cm | Compas : 0.3° RMS AHRS : 2° RMS | 0.1° | Tilt : 0.2° RMS | 0.01° | Compensation dynamique des distorsions magnétiques |  |
| AHRS TRAX | 3.6 - 5V | - RS232 - USB | 3.5 x 4.3 x 1 cm | Compas : 0.3° RMS AHRS : 2° RMS | 0.1° | Tilt : 0.2° RMS | 0.1° | Compensation dynamique des distorsions magnétiques | |
| AHRS SeaTRAX | 3.8 - 9V | RS232 | 7 x 1.2 x 1 cm | <0.3° RMS : ≤65° of pitch after full range calibration <0.5° RMS : ≤80° of pitch after full range calibration <2.0° RMS : ≤5° of pitch after 2D calibration <2.0° RMS : ≤2 times the calibration tilt angle when using limited-tilt calibration | 0.1° | Pitch : 0.2° RMS Roll : 0.2° RMS (≤65° of pitch) 0.4° RMS (≤80° of pitch) 1.0° RMS (≤86° of pitch) | 0.01° | Compensation dynamique des distorsions magnétiques | |
| TARGET POINT DMC | 4.75 - 5.25V | RS232 subset (CMOS level) | 3.3 x 3.1 x 1.35 cm | ± 0.5° RMS | 0.01° | Pitch & Roll : ± 0.2° RMS |  |
||
| TCM-XB | 3.6 - 5V | Binary RS232 | 3.5 x 4.3 x 1.3 cm | < 0.3° RMS : ≤65° of tilt after full range calibration < 2.0° RMS : ≤5° of tilt after 2D calibration < 2.0°RMS : ≤2 times the calibration tilt angle after limited-tilt calibration | 0.1° | Tilt : 0.2° RMS | 0.01° | |
|
| TCM-MB | 3.3 - 5V | - Binary CMOS - TTL UART | 3.3 x 3.1 x 1.3 cm | 0.1° | Tilt : 0.2° RMS | 0.01° | |
||
| PRIME | 3.6 - 5V | Binary RS232 | 3.3 x 3.1 x 1.3 cm | 1° RMS | 0.1° | Tilt : 1° RMS | 0.1° | |